BSYKJ - M P GEAR OIL SAE 90
- MSDS: BSYKJ
- Manufacturer: E F HOUGHTON AND CO
- Product Name: M P GEAR OIL SAE 90
- National Stock Number: 9150-00-932-3357
Product Identification
Product ID:M P GEAR OIL SAE 90
MSDS Date:02/21/1990
FSC:9150
NIIN:00-932-3357
MSDS Number: BSYKJ
Responsible Party
US
Emergency Phone: 215-666-4105
Info Phone: 215-666-4105
Preparer: ROBERT E. WILLIAMS
Cage: 73227
Contractor
Telephone: 610-666-4105
Cage: 73277
Ingredients
MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED
CAS: 64741-88-4
RTECS: PY8040501
Fraction By Weight: >60%
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: 5 MG/M3; 10 STEL
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: AVOID BREATHING PRODUCT
MISTS. BREATHING MISTS IN EXCESS OF TLV MAY CAUSE IRRITATION OF
UPPER RESPIRATORY TRACT. PERSONS WITH CHRONIC RESPIRATORY DISEASE
MAY SHOW INCREASED SYMPTOMS DUE TO IRRITATION. SKIN: MAY BE A
SLIGHT IRRITANT TO SENSITIVE SKIN ON PROLONGED CONTACT. EYE: MILD
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: IRRITANT. INGEST: NO SIGNIFICANT
EFFECTS EXPECTED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE TO SOURCE OF FRESH AIR. SKIN: WASH WITH SOAP
AND WATER. EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES, CONSULT
PHYSICIAN IF IRRITATION PERSISTS. INGEST: DO NOT INDUCE VOMITING.
GIVE LIQU IDS, CONSULT PHYSICIAN. PRODUCT IS MAINLY MINERAL OIL.
Fire Fighting
Flash Point Method:COC
Flash Point:430F,221C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . TREAT AS AN OIL FIRE.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:POTNTL AS A POLLUTANT: PROD IS MAINLY MINERAL
OIL & EASILY SEPARATED FROM WATER. KEEP OUT OF SEWERS & STREAMS.
PROD NOT A POLLUTANT IF EFTIVE WASTE DISP METH ARE UTILIZIED. APPLY
DRY OIL ABSORB TYPE M ATERIAL AND SWEEP UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID CONTACT WITH STRONG OXIDIZERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NOT REQUIRED. USE NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:EXHAUST TYPE IF MISTING; OTHERWISE GENERAL TYPE IS
SATISFACTORY.
Protective Gloves:RUBBER.
Eye Protection:ANSI APPRV CHEM WORK GOGGLES
Other Protective Equipment:NOT REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
BP: HIGH: WIDE RANGE.
Chemical Properties
Boiling Pt:B.P. Text:SUPP DATA
Vapor Pres:<0.0001
Vapor Density:>15
Spec Gravity:0.88
Evaporation Rate & Reference:1000X SLOWER (ETHER=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK GREEN OIL; BLAND PETROLEUM OIL ODOR
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL: OXIDES OF CARBON.
Disposal
Waste Disposal Methods:FOLLOW FEDERAL, STATE AND LOCAL REGULATIONS OF
DISPOSAL OF WASTE PETROLEUM OIL. MAY BE INCINERATED UNDER
CONTROLLED CONDITIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.